Product Details
Cerberus BDS 152
87 -110 UERO
CASH
105
GERMANY
The isolation module is used for isolating the short point onthe detection bus so that the devices which are connected tothe controller before the short point will not be influenced. Itwill automatically recover to its normal status when the fault iseliminated.In case the short happens on the detection bus, theisolation module activates so that the devices before theshort point can work normally.Parallel connection on the first place of each branch or stub.No need to set address.When one loop monitors several floors, on each floor one Isolation module shall be installed.One isolation module can connect up to 25 field devices.P
0
, S
0
on BDS152 connect to control unit P,S terminalwith polarity sensitive. The P,S terminal on BDS152 canconnect to the P,S of other field devices with polarity free.Fault will be automatic detected and displayed on thecontroller.Working Temperature-20 ~ +50
℃
Working Humidity
≤
95% (40
±
2
℃
)Activation Current
≤
0.5mAPass through Voltage
≤
1VWiring Capacity1.0 ~ 1.5mm
2
BDS152/e BDS152 Isolation Module
A6C50000005
BDS Series Field Devices
0
, S
0
on BDS152 connect to control unit P,S terminalwith polarity sensitive. The P,S terminal on BDS152 canconnect to the P,S of other field devices with polarity free.Fault will be automatic detected and displayed on thecontroller.Working Temperature-20 ~ +50
℃
Working Humidity
≤
95% (40
±
2
℃
)Activation Current
≤
0.5mAPass through Voltage
≤
1VWiring Capacity1.0 ~ 1.5mm
2
BDS152/e BDS152 Isolation Module
A6C50000005
BDS Series Field Devices
The isolation module is used for isolating the short point onthe detection bus so that the devices which are connected tothe controller before the short point will not be influenced. Itwill automatically recover to its normal status when the fault iseliminated.In case the short happens on the detection bus, theisolation module activates so that the devices before theshort point can work normally.Parallel connection on the first place of each branch or stub.No need to set address.When one loop monitors several floors, on each floor one Isolation module shall be installed.One isolation module can connect up to 25 field devices.P
0
, S
0
on BDS152 connect to control unit P,S terminalwith polarity sensitive. The P,S terminal on BDS152 canconnect to the P,S of other field devices with polarity free.Fault will be automatic detected and displayed on thecontroller.Working Temperature-20 ~ +50
℃
Working Humidity
© 2026 Copyright PT. Quinratu Karya Prisma by arFha. Page generated in 0.0899 seconds.